RF Isolator
An RF isolator is a passive two-port device commonly used in radio frequency (RF) systems to provide isolation between components or subsystems. Its primary function is to allow signals to pass through in one direction while minimizing or blocking signal reflection or transmission in the opposite direction. The RF isolator is typically placed between two devices or subsystems to protect sensitive components from undesired signal reflections, enhance system performance, and prevent interference. RF Isolator is used in the design of RF frequency converters, Jingxin mainly designs and produces the coaxial isolator for the solutions. According to the feedback, there are some good seller of VHF,UHF and high frequency isolators in our product list . As a custom designer, Jingxin can specially tailor one as the demand.
-
RF Isolators Series
-
Microstrip Isolators Series, Custom Design Available
-
High Frequency Isolator Operating from 43.5-45.5GHz JX-CI-43.5G45.5G-2.4mm-Male
-
High Isolation VHF Triple Isolator Operating From 147-174MHz
-
Coaxial Isolator N-F/M Connector 157-159MHz Low Insertion Loss JX-CI-157M159M-60NF
-
Dual Junction Coaxial Isolator N-F/M Connector 148-150MHz Low Insertion Loss JX-CI-148M...
-
ISOLATOR Drop-in Connector 793-805MHz Low Insertion Loss JX-TI-WG3538X-2
-
Dual Junction Coaxial Isolator N-F/M Connector 157-159MHz Low Insertion Loss JX-CI-157M...
-
Coaxial Isolator N-F Connector 118-156MHz Low Insertion Loss JX-CI-118M156M-100W
-
ISOLATOR Drop-in Connector 150-174MHz Low Insertion Loss JX-TI-162-12S
-
VHF Coaxial Isolator Operating from 135-175MHz JX-CI-135M175M-20NF
-
Coaxial Isolator N-F/M Connector 16-17GHz Low Insertion Loss JX-TI-16G17G-23S